虚拟化容器,大数据,DBA,中间件,监控。

关于ip_conntrack调整的一个好文

10 07月
作者:admin|分类:系统运维

关于ip_conntrack调整的一个好文  



Tuning Linux firewall connection tracker ip_conntrack

Overview
If your Linux server should handle lots of connections, you can get into the problem with ip_conntrack iptables module. It limits number of simultaneous connections your system can have. Default value (in CentOS and most other distros) is 65536.
 
To check how many entries in the conntrack table are occupied at the moment:
 
cat /proc/sys/net/ipv4/netfilter/ip_conntrack_count
 
Or you can dump whole table :
 
cat /proc/net/ip_conntrack
 

Conntrack table is hash table (hash map) of fixed size (8192 entries by default), which is used for primary lookup. When the slot in the table is found it points to list of conntrack structures, so secondary lookup is done using list traversal. 65536/8192 gives 8 – the average list length. You may want to experiment with this value on heavily loaded systems.
 
Modifying conntrack capacity
 To see the current conntrack capacity:
 
cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max
 
You can modify it by echoing new value there:
 
# echo 131072 > /proc/sys/net/ipv4/netfilter/ip_conntrack_max
 # cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max
 131072
 
Changes are immediate, but temporary – will not survive reboot.
 
Modifying number of buckets in the hash table
 As mentioned above just changing this parameter will give you some relief, if your server was at the cap, but it is not ideal setup. For 1M connections average list becomes 1048576 / 8192 = 128, which is a bit too much.
 
To see current size of hash table:
 
cat /proc/sys/net/ipv4/netfilter/ip_conntrack_buckets
 
which is read-only aliase for module parameter:
 
cat /sys/module/ip_conntrack/parameters/hashsize
 
You can change it on the fly as well:
 
#echo 32768 > /sys/module/ip_conntrack/parameters/hashsize
 # cat /sys/module/ip_conntrack/parameters/hashsize
 32768
 

Persisting the changes
 Making these changes persistent is a bit tricky.
 For total number of connection just edit /etc/sysctl.conf (CentOs, Redhat etc) and you are done:
 
# conntrack limits
 net.ipv4.netfilter.ip_conntrack_max = 131072
 

Not so easy with hashtable size. You need to pass parameters to kerenl module at boot time. Edit add to /etc/modprobe.conf:
 
options ip_conntrack hashsize=32768
 

Memory usage
 You can find how much kernel memory each conntrack entry occupies by grepping /var/log/messages :
 
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
 
1M connections would require 304MB of kernel memory.
浏览1792 评论0
返回
目录
返回
首页
报错ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack zabbix触发器表达式详解